Magnetic resonance imaging of the uterus in vivo and in vitro at an ultra low magnetic field (0.02 T): Assessment of its normal structure and of leiomyomas

The purpose of this investigation was to analyze the normal anatomy and leiomyomas of the uterus with an ultra low field (0.02 T) magnetic resonance imaging (MRI) device. MR imaging was performed on 18 uteri, 11 of which were imaged both preoperatively (in vivo) and as an operative specimen (in vitro), 6 only as an operative specimen, and 1 only preoperatively. All uteri were examined histologically after imaging. The junctional zone was much better delineated in vivo than in vitro, indicating that its appearance on MR is partly due to blood flow. No structures contributing to its visibility in vitro could be demonstrated histologically. Twenty leiomyomas (size range 7–79 mm) in 12 uteri were found with MRI. They were slightly better discerned in vivo than in vitro. The leiomyomas, having no degenerative changes, had a signal intensity which was the same or lower than that of the myometrium. On images obtained in vitro the signal intensity of these leiomyomas relative to that of myometrium correlated directly with their muscular content (R = 0.74, p = .002). The authors conclude that the junctional zone is a sum of physiological and structural factors, the latter being responsible for its in vitro delineation. MR imaging of the uterus in vitro did not give more information than MR imaging in vivo. All leiomyomas larger than 10 mm could be detected, indicating that MR imaging at 0.02 T is an accurate method for the imaging of the uterine leiomyomas.     

The extendible cell method for closest point problems

The extendible cell method is an application of order preserving extendible hashing to multidimensional point files. We derive some of its performance characteristics and show its expected case optimality for closest point problems.     

Aurophilicity-coordination interplay in the design of cyano-bridged nickel(II)-Gold(I) bimetallic assemblies: structural and computational studies of the gold(I)-gold(I) interactions

Two polymorphic cyano-bridged Au(I)-Ni(II) bimetallic complexes of formulas [Ni(en)2Au(CN)2][Au(CN)2] (1) and [Ni(en)2[Au(CN)2]2] (2) have been prepared from the 1:2 reaction between [Au(CN)2]- and either [Ni(en)2Cl2]Cl or [Ni(en)3]Cl2.2H2O, respectively. The structure of 1 consists of polymeric cationic chains of alternating [Au(CN)2]- and [Ni(en)2]2+ units running along the a axis and [Au(CN)2]- anions lying between the chains. The noncoordinated dicyanoaurate anions are aligned perpendicular to the ac plane and involved in aurophilic interactions with the bridging dicyanoaurate groups, ultimately leading to a 2D bimetallic grid. The structure of 2 consists of trinuclear molecules made of two [Au(CN)2]- anions linked to [Ni(en)2]2+ unit in trans configuration. Trinuclear units are joined by aurophilic interactions to form 1D zigzag chains. The magnetic properties of these compounds are strongly dominated by the local anisotropy of the octahedral Ni(II) ions, thus indicating that the magnetic exchange interaction mediated by dicyanoaurate bridging groups, if it exists, is very weak. To get insight into the electronic properties of the inter- and intramolecular interactions of the [Au(CN)2]- building blocks, the structures of different aggregates of dicyanogold units were optimized and then analyzed by making use of atoms-in-molecules (AIM) theory. Moreover, bond indices were calculated by methods based upon nonlinear population analysis.     

Study of metal-loaded activated charcoals for the separation and determination of selenium species by energy dispersive X-ray fluorescence analysis

Conversion of adsorption properties of activated charcoal (C^∗) by metal modification towards selenite, selenate and seleno-dl-methionine (Se-Met) was studied. Several metals were included in modification studies and also a procedure was developed for the separation and independent determination of microgram quantities of these selenium species in aqueous solution. Selenium species were collected one by one from the same sample solution onto collector material by adsorbing them directly or after complex formation onto different metal-loaded activated charcoals (MgC^∗ and FeC^∗). The mass of selenium in these collectors was measured directly by energy dispersive X-ray fluorescence spectrometry (EDXRF). Detection limits for all three selenium species were better than 6 μg corresponding to concentration of 60 μg/l with 0.100 l of initial sample volume.     

Formic and acetic acids in a nitrogen matrix: Enhanced stability of the higher-energy conformer

Formic acid (HCOOH, FA) and acetic acid (CH(3)COOH, AA) are studied in a nitrogen matrix. The infrared (IR) spectra of cis and trans conformers of these carboxylic acids (and also of the HCOOD isotopologue of FA) are reported and analyzed. The higher-energy cis conformer of these molecules is produced by narrowband near-IR excitation of the more stable trans conformer, and the cis-to-trans tunneling decay is evaluated spectroscopically. The tunneling process in both molecules is found to be substantially slower in a nitrogen matrix than in rare-gas matrices, the cis-form decay constants being approximately 55 and 600 times smaller in a nitrogen matrix than in an argon matrix, for FA and AA respectively. The stabilization of the higher-energy cis conformer is discussed in terms of specific interactions with nitrogen molecule binding with the OH group of the carboxylic acid. This model is in agreement with the observed differences in the IR spectra in nitrogen and argon matrices, in particular, the relative frequencies of the νOH and τCOH modes and the relative intensities of the νOH and νC=O bands.     

Ligand creation via linking—a rapid and convenient method for construction of novel supported PyOX-ligands

A novel supported amino alcohol linker was synthesized and utilized for attachment of picolinic acid derivatives onto different supports. When the resin bound molecule was further activated, the PyOX-moiety could be constructed reliably in enantiopure form. Furthermore, an efficient Pd-catalyzed modification of a picolinic acid derivative is presented.     

Comparison between the classical theory predictions and molecular simulation results for heterogeneous nucleation of argon

We have performed Monte Carlo simulations of homogeneous and heterogeneous nucleations of Lennard-Jones argon clusters. The simulation results were interpreted using the major concept posing a difference between the homogeneous and heterogeneous classical nucleation theories-the contact parameter. Our results show that the multiplication concept of the classical heterogeneous nucleation theory describes the cluster-substrate interaction surprisingly well even for small molecular clusters. However, in the case of argon nucleating on a rigid monolayer of fcc(111) substrate at T=60 K, the argon-substrate atom interaction being approximately one-third as strong as the argon-argon interaction, the use of the classical theory concept results in an underestimation of the heterogeneous nucleation rate by two to three orders of magnitude even for large clusters. The main contribution to this discrepancy is induced by the failure of the classical theory of homogeneous nucleation to predict the energy involved in bringing one molecule from the vapor to the cluster for clusters containing less than approximately 15 molecules.     

Comparison of quartz and Teflon filters for simultaneous collection of size-separated ultrafine aerosol particles and gas-phase zero samples

In this research, the two most common filter media, quartz and Teflon, were tested to obtain information about the possible adsorption of gas-phase compounds onto filters during long sample collection of atmospheric aerosols. Particles of nanometer-size for off-line chemical characterization were collected using a recently introduced differential mobility analyzer for size separation. Samples were collected at an urban site (Helsinki, SMEARIII station) during spring 2010. Sampling time was 4 to 10 days for particles 50, 40, or 30 nm in diameter. Sample air flow was 4 L/min. The sampling setup was arranged so that two samples were obtained for each sampling period almost simultaneously: one containing particles and adsorbed gas-phase compounds and one containing adsorbed gas-phase compounds only. Filters were extracted and analyzed for the presence of selected carboxylic acids, polyols, nitrogen-containing compounds, and aldehydes. The results showed that, in quartz filter samples, gas-phase adsorption may be responsible for as much as 100% of some compound masses. Whether quartz or Teflon, simultaneous collection of gas-phase zero samples is essential during the whole sampling period. The dependence of the adsorption of gas-phase compounds on vapor pressure and the effect of adsorption on the deposited aerosol layer are discussed.     

The reactions of tellurium tetrahalides with triphenylphosphine under ambient conditions

The reactions of tellurium tetrahalides and triphenylphosphine in tetrahydrofuran have been carried out under ambient conditions and afford [(Ph(3)PO)(2)H](2)[Te(2)X(10)] [X = Cl (1), Br (2)] and [(Ph(3)PO)(3)(OH(3)])(2)[TeI(6)] (4). The X-ray structures of 1 and 2 show that they are isostructural and contain discrete [Te(2)X(10)](2-) anions exhibiting octahedral coordination around both tellurium atoms with one shared edge and [Ph(3)POH...OPPh(3)](+) cations that show strong hydrogen bonds (the O...O distances are 2.399 and 2.404 A for 1 and 2, respectively). The compound 4 is built up with discrete octahedral hexaiodotellurate anions and [(Ph(3)PO)(3)(OH(3))](+) cations. The reaction of TeBr(4) and PPh(3) also results in the formation of formally zwitterionic Ph(3)PO(CH(2))(4)TeBr(4) (3). This reaction involves an unprecedented THF ring opening in which the oxygen atom becomes bonded to the phosphorus atom of triphenylphosphine and the carbon atom at the other end of the five-atomic chain becomes bonded to the tellurium atom of TeBr(4). The ring opening of the solvent THF is also taking place in the reaction involving tellurium tetraiodide, as indicated by the formation of C(4)H(8)TeI(2) (5). The reaction may initially lead to Ph(3)PI(2) that reacts with THF yielding Ph(3)PO and ICH(2)(CH(2))(2)CH(2)I. The latter species reacts with elemental tellurium producing 5. Depending on the conditions upon crystallization, two polymorphs of C(4)H(8)TeI(2) (5a and 5b) are observed. While the molecular structures of the two forms are virtually identical, their packing and intermolecular contacts are different. Two further minor products (6a and 6b) were isolated in the reaction of TeI(4) and PPh(3): Both are formally 1:1 adducts of 5 and TeI(4), but they differ considerably in their structures. 6a can be formulated as [C(4)H(8)TeI(+)](2)[Te(2)I(10)(2-)] and 6b as [C(4)H(8)TeI(+)](2)(TeI(3)(+))(2)(I(-))(4). The latter compound exhibits framework similar to that of the tetramers in gamma- and delta-TeI(4).     

IR-induced processes for allyl alcohol dimers involving an intermolecular OH...π Bond in low-temperature matrices

Sharp peaks were observed in the IR spectra of allyl alcohol dimers in the νOH and τOH regions in low-temperature Ar and N₂ matrices. In Ar a peak at 3587 cm^?1 was found to increase in intensity upon annealing and decrease upon IR irradiation; it is concluded that this peak is due to an OH...π interaction (of a cyclic structure) present in part of the dimers. This is the first time such an interaction and photoprocess have been found for an alcohol in matrices. Also a faster photo-process was found. Confomer changes in the monomers accompany the photoprocess in allyl alcohol dimers.